Preparation and characterizations of amorphous nanostructured SiC thin films by low energy pulsed laser deposition

Amorphous silicon carbide (SiC) thin films were deposited on silicon substrates by pulsed laser ablation at room temperature. Thicknesses and surface morphology of the thin films were characterized using optical profilers, atomic force and field emission scanning electron microscopy. Nanohardnes, modulus and scratch resistance properties were determined using XP nanoindenter. The results show that crack free, smooth and nanostructured thin films can be deposited using low laser energy densities.     

Delaminated zeolite‐catalysed synthesis of high‐molecular weight polycarbosilane as a low shrinkage SiC precursor

A polycarbosilane (PCS) with a higher number–average molecular weight (2710 vs. 1570), and hence with a higher ceramic yield (74 vs. 68%), compared to a commercial Nipusi type S PCS has been synthesized via the catalytic decomposition of polydimethylsilane at 400 °C using H‐ITQ‐2, a delaminated zeolite with a very high external surface area, as a solid acid. The silicon carbide film fabricated using this PCS was found to show a much lower level (16 vs. 39%) of shrinkage than the commercial PCS‐derived film, together with better mechanical properties, suggesting the potential of its preceramic polymer to produce robust ceramic coatings. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 725–732, 2008     

纳米SiC蓝光发射的研究

在４．６８ｅＶ的激光激发下，室温ＣＶＤ合成的纳米ＳｉＣ粉体，可发射４７５ｎｍ的蓝光，经６００～１１００℃在Ｎ２气氛下进行快速退火（ＲＴＡ）处理，其荧光强度随退火温度升高而增强，当Ｔ≥９００℃时，荧光强度下降，但发光峰位与退火温度无关．通过ＸＲＤ、ＩＲ、ＴＥＭ、ＸＰＳ等研究，认为纳米ＳｉＣ中与氧有关的缺陷可能是引起４７５ｎｍ蓝光发射的主要原因     

Temperature induced rotation in a [4.4]cyclophane

The synthesis, the X-ray, NMR and molecular modeling structure determination of a new orthopara[4.4]cyclophane are reported. The similarity of the π(CO)-π(Ar) driven conformational equilibrium of this compound to the work of an amusement ride machinery is also revealed.     

3,4,9,10-Perylenetetracarboxylicdiimide as an interlayer for ultraviolet organic light emitting diodes

Ultraviolet organic light emitting diodes with 3,4,9,10-perylenetetracarboxylicdiimide (PTCDI) interlayer have been achieved. The emission spectrum and intensity were strongly dependent on the thickness of PTCDI interlayer, in spite of the fact that PTCDI has neither much lower HOMO nor much higher LUMO level, which is considered necessary for efficient charge blocking layers. The influence of PTCDI layer was investigated in three different device configurations and obtained results are discussed. For optimal device configuration, OLED with emission centered at 370 nm and turn-on voltage of 4.5 V is obtained.     

Enhancement of corrosion resistance of electrocodeposited Ni–SiC composites by magnetic field

The corrosion behavior and surface morphology of Ni–SiC composite coatings produced by electrodeposition with the aid of magnetic field were studied. The results of the electrochemical analysis including polarization resistance and potentiodynamic polarization curves showed that a magnetic field of 0.1 T could significantly improve the corrosion resistance of the composite. The electrochemical impedance spectra revealed that a passive layer was formed on the surface of the Ni–SiC coating with the magnetic field. The microstructures of electrodeposited Ni–SiC composite coatings were also examined. More SiC particles were found to be incorporated into the coating with the presence of magnetic field, which was considered to be one of the reasons for the enhancement of corrosion resistance as SiC particles were reported to be corrosion inhibitors. Contribution to special issue “Magnetic field effects in Electrochemistry”     

Pulse surface wave generator of millimeter band wavelength

Theoretical and experimental studies of high-power, relativistic surface-wave microwave Cherenkov generators are briefly considered. Some simulation and experiment results included, the experimentation being made in mm-wave region.